Prime-Line R 7210 Drawer Slide Kit – Replace Drawer Track Hardware Design Most Q

Description

Prime-Line R 7210 Drawer Slide Kit – Replace Drawer Track Hardware Design Most
Brand new sealed
This drawer slide kit is constructed of steel tracks with plastic rollers, and it comes in a white powder coated finish. These tracks feature a self-closing design that commences at the final 2-1/2 in. from the end of the 15-3/4 in. long tracks when closing. The maximum load capacity for this kit is 75 lbs., and it fits most bottom/side-mounted drawer systems. This kit cannot be cut down to fit smaller drawer depths as it is designed with a positive stop at the ends of the fixed tracks, and because the rear rollers (11/16 in. diameter wheels) on the sliding tracks are fastened to the ends of the drawer-mounted track pieces. These bottom mount drawer slides can be installed in drawer cabinets with face frames and without. If installing in drawer cabinet with face frame, Prime-Line's model number R-7240 (purchased separately) may be necessary if existing back plates are damaged. The clearance required between the drawer and the drawer opening for these types of slides is as follows: 1/2 in. on left and right sides, 1/4 in. at the bottom and 5/8 in. at the top. Installation instructions are included with each set, and they can also be found within the manufacturer?s website.- INSTALL OR REPLACE DRAWER TRACK HARDWARE - Whether you are installing new drawers or repairing one that won't open or close properly, Prime-Line Drawer Slide Kit fits most bottom/side-mounted drawer systems. The drawer slide kit is constructed of steel tracks with a white powder coated finish and self-lubricating plastic rollers.- SELF-CLOSING DESIGN - The smooth-gliding tracks in the Prime-Line R 7214 kit features a self-closing design that commences at the final 2-1/2" from the end of the 23-3/4" long tracks when closing.- EASY TO INSTALL - Installation is quick and easy, and the kit contains all necessary fasteners. Installation instructions are included and also available on Prime-Line's website.- 75 LBS MAX LOAD CAPACITY - The maximum load capacity for the drawer slide kit is 75 lbs. and is for use in 24" deep drawer cabinets. It features a positive stop in the closed position and a double stop in the extended position that locks your drawer open, so it cannot be pulled too far out and fall off the tracks.- INSTALLATION TIP - The clearance required between the drawer and the drawer opening for these slides is: 1/2" on left and right sides, 1/4" at the bottom and 5/8" at the top.- INSTALL OR REPLACE DRAWER TRACK HARDWARE ? Whether you are installing new drawers or repairing one that won?t open or close properly, Prime-Line Drawer Slide Kit fits most bottom/side-mounted drawer systems. The drawer slide kit is constructed of steel tracks with a white powder coated finish and self-lubricating plastic rollers.- SELF-CLOSING DESIGN ? The smooth-gliding tracks in the Prime-Line R 7210 kit features a self-closing design that commences at the final 2-1/2? from the end of the 15-3/4? long tracks when closing.- EASY TO INSTALL ? Installation is quick and easy, and the kit contains all necessary fasteners. Installation instructions are included and also available on Prime-Line?s website.- 75 LBS MAX LOAD CAPACITY ? The maximum load capacity for the drawer slide kit is 75 lbs. and is for use in 16? deep drawer cabinets. It features a positive stop in the closed position and a double stop in the extended position that locks your drawer open, so it cannot be pulled too far out and fall off the tracks.- INSTALLATION TIP ? The clearance required between the drawer and the drawer opening for these slides is: 1/2? on left and right sides, 1/4? at the bottom and 5/8? at the top.- SELF-CLOSING DESIGN ? The smooth-gliding tracks in the Prime-Line R 7212 kit features a self-closing design that commences at the final 2-1/2? from the end of the 19-3/4? long tracks when closing.- 75 LBS MAX LOAD CAPACITY ? The maximum load capacity for the drawer slide kit is 75 lbs. and is for use in 20? deep drawer cabinets. It features a positive stop in the closed position and a double stop in the extended position that locks your drawer open, so it cannot be pulled too far out and fall off the tracks.- SELF-CLOSING DESIGN ? The smooth-gliding tracks in the Prime-Line R 7211 kit features a self-closing design that commences at the final 2-1/2? from the end of the 17-3/4? long tracks when closing.- EASY TO INSTALL ? Installation is quick and easy, and the kit contains all necessary fasteners.- 75 LBS MAX LOAD CAPACITY ? The maximum load capacity for the drawer slide kit is 75 lbs. and is for use in 18? deep drawer cabinets. It features a positive stop in the closed position and a double stop in the extended position that locks your drawer open, so it cannot be pulled too far out and fall off the tracks.